All you really care about is having the old holes covered with the new light. There is a big hole in the center for the wires, so you have to seal the whole thing anyway, so the old holes are not a problem. I replace all of mine with LEDs. They are clear lens with amber or red LEDs. I liked the look of the clear lens with the chrome bezel (yes the bezel is included even thought it is not shown). It just has a cleaner look over all. The LEDs I bought are these:
You can also search that site using the key words "led oblong" and that will give you all the variants of that LED. I bought them 6 or 7 years ago and they all still are working just fine. There may be some other options from them, but they seemed about the cheapest for a complete set. They come in packages of 10, so that gives you a couple of spares if they ever go bad. I've not had any problems with mine and that is just the big advantage with switching to LEDs. You install them and forget about it.
_________________ Dave
The Flying Fortress '83 Revcon Prince 31' FWD 502 w/Howell/GM 16197427 ECM/Edelbrock MPFI,Thorley's & Magnaflows, 4L85E 4 speed, KoniFSD, Yes it is SOLD
FMCA F298817
|