Revcon Forums

The worldwide owner-to-owner support system for the Revcon Motorcoach. NOTE - Due to system error posting is down at this time, although old messages may continue to be read.
It is currently Mon Sep 25, 2023 7:17 pm

All times are UTC

Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Axle Boot
PostPosted: Fri Jan 08, 2021 4:30 pm 

Joined: Mon Dec 14, 2020 3:56 pm
Posts: 34
Made a mistake by placing this under Flatnose. Will try here.

I need new axle boots for my 1984 Revcon King. My search yielded a BT-136,
a NAPA 686-1064 and a Moot cv-2456. I could not locate the BT-136 but I did find the other two. Will these work? I can use any help!!


 Post subject: Re: Axle Boot
PostPosted: Tue Jan 12, 2021 6:04 am 
User avatar

Joined: Sat Sep 14, 2013 12:36 am
Posts: 160
Location: IL
I have no idea if these would work of not, but at least worth looking into:
The way these stretch over the C-V, I'd have to think they would fit just about anything. Otherwise Rockford CV has a listing of sizes. Since I sold my coach, I can't measure to see if any these are close:
The BT 136 is a number stamped on my boot. It was rebuilt by Rockford CV, however when they look up that boot number, it is way smaller than the CVs on our coaches, so I don't know why mine has that number molded into the rubber.
The CVs were made by Con-Vel and were an agricultural product. Con-Vel appears to still be around.


The Flying Fortress
'83 Revcon Prince 31' FWD
502 w/Howell/GM 16197427 ECM/Edelbrock MPFI,Thorley's & Magnaflows,
4L85E 4 speed, KoniFSD,
Yes it is SOLD

FMCA F298817

 Post subject: Re: Axle Boot
PostPosted: Wed Jan 13, 2021 5:59 pm 

Joined: Mon Dec 14, 2020 3:56 pm
Posts: 34
This is an update on my search for axle boots. I called Rockford Constant Velocity to discuss an alternative. Fortunatly, the individual with whom I spoke remembered my previous call and informed me that he had done additional research and found the
BT-136 boot. The problem was due to his not having entered the dash between the BT and the 136 into his computer. So, the BT-136 from Rockford CV Is available and my cost was $46 each plus shipping. Just remember to include the dash!

 Post subject: Re: Axle Boot
PostPosted: Fri Jul 15, 2022 6:58 pm 

Joined: Mon Jun 27, 2022 11:42 pm
Posts: 14
These are the boots I picked up. EMPI 86-1064-D. They fit fine, the only thing is the new clip that comes in the box is way too small. Play nice with the old one and reuse it.


20220715_134708.jpg [ 156.8 KiB | Viewed 2775 times ]
File comment: Left is new.
20220715_134550.jpg [ 113.31 KiB | Viewed 2775 times ]
20220715_134627.jpg [ 184.82 KiB | Viewed 2775 times ]
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group